10 Nov 2021

Joint Chilean and US Mobility Testing in Extreme Environments

Abstract: Vehicle mobility in cold and challenging terrains is of interest to both the US and Chilean Armies. Mobility in winter conditions is highly vehicle dependent with autonomous vehicles experiencing additional challenges over manned vehicles. They lack the ability to make informed decisions based on what they are “seeing” and instead need to rely on input from sensors on the vehicle, or from Unmanned Aerial Systems (UAS) or satellite data collections. This work focuses on onboard vehicle Controller Area Network (CAN) Bus sensors, driver input sensors, and some externally mounted sensors to assist with terrain identification and overall vehicle mobility. Analysis of winter vehicle/sensor data collected in collaboration with the Chilean Army in Lonquimay, Chile during July and August 2019 will be discussed in this report.

5 Oct 2021

Evaluating Drone Truthing as an Alternative to Ground Truthing: An Example with Wetland Plant Identification

Purpose: Satellite remote sensing of wetlands provides many advantages to traditional monitoring and mapping methods. However, remote sensing often remains reliant on labor- and resource- intensive ground truth data for wetland vegetation identification through image classification training and accuracy assessments. Therefore, this study sought to evaluate the use of unmanned aircraft system (UAS) data as an alternative or supplement to traditional ground truthing techniques in support of remote sensing for identifying and mapping wetland vegetation.

1 Oct 2021

Characterizing Snow Surface Properties Using Airborne Hyperspectral Imagery for Autonomous Winter Mobility

Abstract: With changing conditions in northern climates it is crucial for the United States to have assured mobility in these high-latitude regions. Winter terrain conditions adversely affect vehicle mobility and, as such, they must be accurately characterized to ensure mission success. Previous studies have attempted to remotely characterize snow properties using varied sensors. However, these studies have primarily used satellite-based products that provide coarse spatial and temporal resolution, which is unsuitable for autonomous mobility. Our work employs the use of an Unmanned Aerial Vehicle (UAV) mounted hyperspectral camera in tandem with machine learning frameworks to predict snow surface properties at finer scales. Several machine learning models were trained using hyperspectral imagery in tandem with in-situ snow measurements. The results indicate that random forest and k-nearest neighbors models had the lowest Mean Absolute Error for all surface snow properties. A Pearson correlation matrix showed that density, grain size, and moisture content all had a significant positive correlation to one another. Mechanically, density and grain size had a slightly positive correlation to compressive strength, while moisture had a much weaker negative correlation. This work provides preliminary insight into the efficacy of using hyperspectral imagery for characterizing snow properties for autonomous vehicle mobility.

16 Aug 2021

Reproducibility Assessment and Uncertainty Quantification in Subjective Dust Source Mapping

Abstract: Accurate dust-source characterizations are critical for effectively modeling dust storms. A previous study developed an approach to manually map dust plume-head point sources in a geographic information system (GIS) framework using Moderate Resolution Imaging Spectroradiometer (MODIS) imagery processed through dust-enhancement algorithms. With this technique, the location of a dust source is digitized and recorded if an analyst observes an unobscured plume head in the imagery. Because airborne dust must be sufficiently elevated for overland dust-enhancement algorithms to work, this technique may include up to 10 km in digitized dust-source location error due to downwind advection. However, the potential for error in this method due to analyst subjectivity has never been formally quantified. In this study, we evaluate a version of the methodology adapted to better enable reproducibility assessments amongst multiple analysts to determine the role of analyst subjectivity on recorded dust source location error. Four analysts individually mapped dust plumes in Southwest Asia and Northwest Africa using five years of MODIS imagery collected from 15 May to 31 August. A plume-source location is considered reproducible if the maximum distance between the analyst point-source markers for a single plume is ≤10 km. Results suggest analyst marker placement is reproducible; however, additional analyst subjectivity-induced error (7 km determined in this study) should be considered to fully characterize locational uncertainty. Additionally, most of the identified plume heads (> 90%) were not marked by all participating analysts, which indicates dust source maps generated using this technique may differ substantially between users.

9 Aug 2021

Simultaneous Mapping of Coastal Topography and Bathymetry from a Lightweight Multicamera UAS

Abstract: A low-cost multicamera Unmanned Aircraft System (UAS) is used to simultaneously estimate open-coast topography and bathymetry from a single longitudinal coastal flight. The UAS combines nadir and oblique imagery to create a wide field of view (FOV), which enables collection of mobile, long d Coastal mapping, multiview stereo (MVS), nearshore morphology, remote sensing, structure from motion (SfM), Unmanned Aircraft Systems (UAS)well timeseries of the littoral zone suitable for structure-from motion (SfM), and wave speed inversion algorithms. Resultant digital surface models (DSMs) compare well with terrestrial topographic lidar and bathymetric survey data at Duck, NC, USA, with root-mean-square error (RMSE)/bias of 0.26/–0.05 and 0.34/–0.05 m, respectively. Bathymetric data from another flight at Virginia Beach, VA, USA, demonstrates successful comparison (RMSE/bias of 0.17/0.06 m) in a secondary environment. UAS-derived engineering data products, total volume profiles and shoreline position, were congruent with those calculated from traditional topo-bathymetric surveys at Duck. Capturing both topography and bathymetry within a single flight, the presented multicamera system is more efficient than data acquisition with a single camera UAS; this advantage grows for longer stretches of coastline (10 km). Efficiency increases further with an on-board Global Navigation Satellite System–Inertial Navigation System (GNSS-INS) to eliminate ground control point (GCP) placement. The Appendix reprocesses the Virginia Beach flight with the GNSS–INS input and no GCPs.

14 May 2021

Remotely Sensed Habitat Assessment of Bottomland Hardwood and Swamp Habitat: West Shore Lake Pontchartrain Hurricane Storm Damage Risk Reduction System Potential Impact Area

Purpose: This study used remote sensing techniques to identify and assess the current condition of bottomland hardwood (BLH) and swamp habitats within the West Shore Lake Pontchartrain (WSLP) hurricane storm-damage risk reduction system (HSDRRS) project area. This effort provides baseline knowledge of the location and quality of these habitats prior to the construction of the WSLP HSDRRS project. The resultant products will assist the USACE—New Orleans District (MVN) by informing ecosystem decision-making related to environmental assessments.

12 May 2021

Methodology for Remote Assessment of Pavement Distresses from Point Cloud Analysis

Abstract: The ability to remotely assess road and airfield pavement condition is critical to dynamic basing, contingency deployment, convoy entry and sustainment, and post-attack reconnaissance. Current Army processes to evaluate surface condition are time-consuming and require Soldier presence. Recent developments in the area of photogrammetry and light detection and ranging (LiDAR) enable rapid generation of three-dimensional point cloud models of the pavement surface. Point clouds were generated from data collected on a series of asphalt, concrete, and unsurfaced pavements using ground- and aerial-based sensors. ERDC-developed algorithms automatically discretize the pavement surface into cross- and grid-based sections to identify physical surface distresses such as depressions, ruts, and cracks. Depressions can be sized from the point-to-point distances bounding each depression, and surface roughness is determined based on the point heights along a given cross section. Noted distresses are exported to a distress map file containing only the distress points and their locations for later visualization and quality control along with classification and quantification. Further research and automation into point cloud analysis is ongoing with the goal of enabling Soldiers with limited training the capability to rapidly assess pavement surface condition from a remote platform.

12 May 2021

Channel Assessment Tools for Rapid Watershed Assessment

Purpose: Existing Delta Headwaters Project (DHP) watershed stabilization studies are focused on restoration and stabilization of degraded stream systems. The original watershed studies formerly under the Demonstration Erosion Control (DEC) Project started in the mid 1980s. The watershed stabilization activities are continuing, and because of the vast number of degraded watersheds and limited amount of yearly funding, there is a need for developing a rapid watershed assessment approach to determine which watersheds to prioritize for further work. The goal of this project is to test the FluvialGeomorph (FG) toolkit to determine if the Rapid Geomorphic Assessment approach can identify channel stability trends in Campbell Creek and its main tributary. The FG toolkit (Haring et al. 2019; Haring et al. 2020) is a new rapid watershed assessment approach using high-resolution terrain data (Light Detection and Ranging [LiDAR]) to support U.S. Army Corps of Engineers (USACE) watershed planning. One of the principal goals of the USACE SMART (Specific Measureable Attainable Risk-Informed Timely) Planning is to leverage existing data and resources to complete studies. The FG approach uses existing LiDAR to rapidly assess either reach-specific analysis for smaller more focused studies or larger watersheds or ecosystems. The rapid assessment capability can reduce the time and cost of planning by using existing information to complete a preliminary watershed assessment and provide rapid results regarding where to focus more detailed study efforts.

10 May 2021

Monitoring Ecological Restoration with Imagery Tools (MERIT): Python-based Decision Support Tools Integrated into ArcGIS for Satellite and UAS Image Processing, Analysis, and Classification

Abstract: Monitoring the impacts of ecosystem restoration strategies requires both short-term and long-term land surface monitoring. The combined use of unmanned aerial systems (UAS) and satellite imagery enable effective landscape and natural resource management. However, processing, analyzing, and creating derivative imagery products can be time consuming, manually intensive, and cost prohibitive. In order to provide fast, accurate, and standardized UAS and satellite imagery processing, we have developed a suite of easy-to-use tools integrated into the graphical user interface (GUI) of ArcMap and ArcGIS Pro as well as open-source solutions using NodeOpenDroneMap. We built the Monitoring Ecological Restoration with Imagery Tools (MERIT) using Python and leveraging third-party libraries and open-source software capabilities typically unavailable within ArcGIS. MERIT will save US Army Corps of Engineers (USACE) districts significant time in data acquisition, processing, and analysis by allowing a user to move from image acquisition and preprocessing to a final output for decision-making with one application. Although we designed MERIT for use in wetlands research, many tools have regional or global relevancy for a variety of environmental monitoring initiatives.

10 May 2021

Automated Terrain Classification for Vehicle Mobility in Off-Road Conditions

ABSTRACT:  The U.S. Army is increasingly interested in autonomous vehicle operations, including off-road autonomous ground maneuver. Unlike on-road, off-road terrain can vary drastically, especially with the effects of seasonality. As such, vehicles operating in off-road environments need to be informed about the changing terrain prior to departure or en route for successful maneuver to the mission end point. The purpose of this report is to assess machine learning algorithms used on various remotely sensed datasets to see which combinations are useful for identifying different terrain. The study collected data from several types of winter conditions by using both active and passive, satellite and vehicle-based sensor platforms and both supervised and unsupervised machine learning algorithms. To classify specific terrain types, supervised algorithms must be used in tandem with large training datasets, which are time consuming to create. However, unsupervised segmentation algorithms can be used to help label the training data. More work is required gathering training data to include a wider variety of terrain types. While classification is a good first step, more detailed information about the terrain properties will be needed for off-road autonomy.